Subscribe to TIC

Posts tagged with “Tips”

Tips: 41 Comments | Add a Comment

Custom Tool Tote

by

Years ago, after all the trips back and forth to my truck for small hand tools began to tire me out more than the work, I started carrying a milk crate, fitted with a shoulder sling. But all the smallest tools, and the screws, driver bits, drill bits, wrenches, etc., ended up in a confused mess at the bottom.

I needed something I could organize and something I could stand on, something that would get me to the very top of a 6/8 door, something that would help me reach the pins on an 8-ft. door, something that would let me see over the top shelf in a closet. And I wanted something I could sit on, too, while chiseling tricky mortises in a jamb or drinking a cup of coffee on a break. Read the full article…

Feature Articles: 14 Comments | Add a Comment

Installing Exterior Doors in HVHZ Zones

by

This article might not appeal to all TiC readers, but that’s not the point of THISisCarpentry. Our goal isn’t to reach everyone. Our mission is to provide quality educational material for carpenters, even if it’s only a few of them. Still, I expect that even if you never have to install doors to meet HVHZ code, you’ll learn a few interesting things from this demonstration, things that will probably apply to normal door installation, too. Read the full article…

Tips: 10 Comments | Add a Comment

“Dutchman” Door Repair

by

For the past two years I have been lucky enough to be a student in the Preservation Carpentry program at the North Bennet Street School in Boston, MA. I’ve been in the building business for the last ten years, and a carpenter for around half that time, mostly working doing renovations, trim, cabinets, and the usual “stuff” that falls in the realm of modern carpentry. Occasionally, prior to deciding to become a preservation carpenter, I would encounter something that we all find from time to time—rotten or damaged wood in some part or piece of a structure that needed some attention beyond putty and paint to ensure it was going to last or pass muster. Read the full article…

Feature Articles: 34 Comments | Add a Comment

Bisquick Cabinets

by

Once I find something that works, I pretty much stay with it. And the system I’ve used for making simple cabinets is still largely the same. I use multiple shaper setups for making cope-and-stick stile-and-rail doors, raising panels, and other high-end cabinetry projects. But in this article I want to focus on basic cabinet construction using a minimal number of tools—tools that most carpenters already own. Read the full article…

Feature Articles: 19 Comments | Add a Comment

Installing Sidelight/Door/Sidelight Units

by

For the 2014 IBS show, Plastpro asked me to produce a special presentation on installing an SDS unit. They shipped me all the materials so I could practice the presentation and shoot a video before the event. I was kind of surprised when the freight delivery arrived and the package was so small—the entire unit came knocked down, which reminded me of the olden days. Read the full article…

Building Basics, Toolbox: 5 Comments | Add a Comment

Track Saw Tutorials

by

Trimming a door bottom, back beveling a door, and beveling shelves

I recently worked on a video series for Festool in which I covered examples of how you might use a Festool track saw in a shop or on the jobsite. In the following videos, I demonstrate how a track saw produces exceptional results when trimming down doors, how using a track saw can save time and additional steps when back beveling a door, and how a track saw offers a better solution than a table saw for making complex bevel or miter cuts.  Read the full article…