Ever wish you had a work table that could handle all your jobs?
When I first started out over fifteen years ago, I would use anything I could find as a table. I’d lay plywood on the ground, I’d set plywood on wood blocks, and, finally, I grew up enough to use sawhorses. But most of the time my “table” was never big enough for the project I was working on. And it was never efficient. Read the full article…
On the only cold, rainy day of the month so far, I made the trip “across the line” to Bellingham, Washington to attend a Katz Roadshow event at a local builder supply store, Builder’s Alliance. I spent the better part of the day in an outdoor makeshift meeting room, surrounded by lifts of plywood and lumber stacked twenty feet high. It was cold, but we were covered and somewhat protected from the wind—you see, I had my Kilt on, and that meant bare legs, brrrr. Fortunately, the show more than made up for the chilly weather. Read the full article…
In the early spring, I was up in Oregon straightening out my fly line—sometimes that takes a week or more, if you know what I mean. While I was up there, Brandon Vaughn from SawGear invited me to his office for a peek at their new automatic length measuring tool. Read the full article…
I’ve hung cabinets a lot of different ways. With a ledger board screwed to the wall; ganging cabinets together and installing them as a unit; one at a time with a helper; one at a time solo. I never found a system that I really liked. Until I met Greg Soper and his super wicked awesome cabinet jacks. Read the full article…
In my article on building a sunburst I described how to find the circumference of a circle given a specific radius. I then divided that circumference in half, because I was working with a half-round arch. This gave me the length measured along the arches curve, otherwise known as the arc length. Finding the arc length of a segmental arch is a little more difficult, but a construction calculator makes it incredibly easy. Read the full article…
A finished skirt board on a flight of stairs is one of those tasks in finish carpentry that remains in prominent view, always open to critique. It’s critical that the workmanship is of the highest caliber. Read the full article…