Subscribe to TIC

Posts tagged with “Festool”

Wood Shop: 18 Comments | Add a Comment

Production & Precision Woodworking

by

Have you ever wondered how a furniture builder can replicate several pieces that are all exactly the same without the use of any fancy CNC machines? Well fortunately there is a method that won’t break the bank, and can be done in a reasonable amount of time. All it requires is some scrap wood or MDF (your choice), a pencil and straight edge for marking lines, a French curve if you want to get extra fancy, blue tape, CA glue, and a router with two different types of pattern cutting bits—one top bearing and one bottom bearing.

Read the full article…

Feature Articles: 4 Comments | Add a Comment

A Side Gate

by

…with appreciation to the Katz bros.

It all started when my wife decided we needed a new gate on the side of the house. The existing gate worked, but being 20 years old, it needed more than just a facelift—it needed a structural lift, too. I’m sure you know what I mean!

Linda found a design on the Internet—an Arts and Crafts gate with a cloud lift for the top rail (you can guess where she found that!). I had never made one before but have faced a lot of tougher challenges in my life. Read the full article…

Tips: 14 Comments | Add a Comment

Multi-Function Work Bench

by

If you’re a finish carpenter and have never incorporated a work bench with dog holes and vertical clamping into your onsite tool-kit, it’s time to change your thinking. Similar to the Fein MultiMaster plunge-cut saw, there are many tools available that you come across and wonder, “How often will I really use that?” But once you own it and use it, you think, “How did I ever live without this tool?” That’s how I feel about our “Multi-Function Slab,” dog-holed worktop. Read the full article…

Building Basics, Toolbox: 5 Comments | Add a Comment

Track Saw Tutorials

by

Trimming a door bottom, back beveling a door, and beveling shelves

I recently worked on a video series for Festool in which I covered examples of how you might use a Festool track saw in a shop or on the jobsite. In the following videos, I demonstrate how a track saw produces exceptional results when trimming down doors, how using a track saw can save time and additional steps when back beveling a door, and how a track saw offers a better solution than a table saw for making complex bevel or miter cuts.  Read the full article…

New & Cool: 28 Comments | Add a Comment

Festool CT Wings

by

The first time I used a Bosch sliding compound miter saw, with up-front bevel lock, I didn’t like the saw at all—it weighed too much. But after working with it for six months, I loved it (as long as someone else would carry it!). And when I first starting using a Kapex, I didn’t like it at all. Other than the fact that I could carry it myself, I just wasn’t comfortable using it. Within a month, I loved it. Tools are like that. You have to use them before you really get to known them, and some you end up loving. Read the full article…

DesignING Class: 8 Comments | Add a Comment

Greek Revival and Italianate Trim

by

Years ago, in a Fine Homebuilding article, I explained how to build corbels for an Italianate mirror frame. I ran out of pages in that short article before I could discuss how to layout the pediment. I have plenty of room here, so I’ll cover that part of the story, and I’ll include all the material that we couldn’t fit into the Fine Homebuilding Master Carpenter article. Read the full article…

Building Basics: 83 Comments | Add a Comment

Installing Baseboard

by

The joinery in baseboard forms the foundation for nearly all the joinery in finish carpentry, which makes perfect sense because baseboard is meant to replicate the foundation—the plinth—of a classical column. Though casing is the first molding profile noticed in a home, and often the first molding installed in a home, baseboard is usually the first molding that an apprentice carpenter learns to cut, and for good reason. Read the full article…

Building Basics, Toolbox: 6 Comments | Add a Comment

Track Saw Tutorial: Processing Sheet Goods

by

I recently worked on a video series for Festool in which I covered examples of how you might use a Festool track saw in a shop or on the jobsite. I typically work out of a small garage-based shop, and yet I’m able to process sheet goods in a one-person operation with limited space—something that wouldn’t be nearly as easy with a table saw. Read the full article…

DesignING Class: 43 Comments | Add a Comment

The Elegant Ellipse

by

From the early part of my career I’ve been dealing with a lot of curved work. The neighborhood I specialize in was built in the early 1900s, and many of the homes are graced with both simple and complex arches. When I started in the business, I relied on millwork shops whenever I needed to restore or remodel projects. But all that changed on one single job. Read the full article…

New & Cool: 61 Comments | Add a Comment

Building Doors the Easy Way: The Festool Domino XL

by

I had a set of custom doors to build from scratch and boy was the timing right. Festool picked me as one of the few carpenters to get a Domino XL for user evaluation. And I took full advantage of the opportunity, one that I felt was both a privilege and a responsibility. I carefully documented the process for my peers on THISisCarpentry. Maybe another contributor will follow up with a different angle on this awesome second generation tool. Read the full article…