How high should we install chair rail? Ask most carpenters and they’ll either say 36 in., 32 in. or they’ll measure the back of a chair and tell you to lay it out so the chair won’t scar the wall. Well, I’m sorry to say, that unless your ceilings are 16-ft. tall, 36 in. is way too high for the chair rail; and letting the back of the chair set the chair rail height is like letting the size of a rug decide the size of a room. In most cases, it just doesn’t work! Read the full article…
I apologize. I read this book more than a year ago and wanted to write a review but never made the time, and I should have. Sure, we’re all busy and short of time, but the truth is, if something is important to you, you make the time, even if it means sacrificing something else that isn’t as important—at least for a little while. And that’s often what it takes to read a good book. This is one I recommend highly to anyone interested in classical architecture and the design of traditional American homes. Read the full article…
Most of my work is at the high-end of the New England custom home market. For the jobs I do, in Boston brownstones that even today sell for several million dollars, there are no off-the-shelf parts—everything is completely custom, or an exact reproduction of work done in the 18th or 19th centuries. Read the full article…
I had a Roadshow meeting at Festool a few months ago, and couldn’t help but take a peek around their workshop. They usually have something new and exciting going on, a new tool or accessory they’re playing with. I was pretty surprised to find a bunch of new things. Read the full article…
What’s a story on etched glass doing in a carpentry magazine? Good question. I don’t know the exact answer. All I know is that every aspect of construction interests me, and when I met Donna Burrows and visited her studio, I knew that other readers would be interested in seeing what I saw. Maybe it’s something about craftsmanship. Read the full article…
I remember reading an article about melamine years ago. The author was very apologetic about the topic because he knew he was addressing woodworkers who had a disdain for the material. Melamine has a rap sheet alright; it is looked down upon by both fabricators and consumers for its imitation wood grain and particleboard core. However, like it or not, it does have a place in the world of cabinetry. And that place is not always located at the bottom of the food chain. Read the full article…
Have you ever wished you had a little desk inside your van, where you could write notes, or even comfortably type on your computer? Well, here’s a nifty solution for any van or truck with an extra cup holder. Read the full article…
I don’t know about you, but I’ve been whining about Bosch’s Angle Finder for years. I mean, I even whined during my presentations at JLC Live shows: “How come the ‘Hold’ button doesn’t hold anything when you press it!?”
But the folks at Bosch must have been listening because they’ve improved their Angle Finder—finally! And while they haven’t done everything I would have liked (it would be nice if they’d put a key pad right on the tool, so you could just key in the crown molding spring angle), they have taken the tool to the next level. Read the full article…
As a finish carpenter, I have gone through god-knows how many shims in my career, and I have a feeling I’m going to need a few more in the years ahead. Read the full article…
As a finish carpenter, I have gone through god-knows how many shims in my career, and I have a feeling I’m going to need a few more in the years ahead. Read the full article…
A few years ago, I wrote an article on Caulk-Free Column Wrap—a column that can be installed without having to come back in six months and caulk the corners or the trim. In this article I’ll take a second step in the same direction, and add some serious and much-needed improvements. Read the full article…
Like a lot of high-end jobs I work on, I’m sworn to secrecy about the clients. All I can say is, this job was on a pristine 7-acre waterfront property on Long Island’s Gold Coast, overlooking Connecticut and the Long Island Sound. The main house is about 7500 sq. ft. of new construction. It’s a to-die-for spot—the view was breathtaking. Even working on this job was incredible. The funny part is how I landed the work. Read the full article…
Remember the term “Made in the U.S.A.”? It wasn’t that long ago that the phrase was often used by manufactures to instill confidence in the product they were promoting. By-and-large, American manufacturers have produced good-quality parts and materials. In my 25+ years in the trades, I can only recall a couple of incidents where we received a part or component made in the U.S. of such poor quality that it failed immediately after being installed. Read the full article…
There’s something about photography that’s related to carpentry, I just can’t quite put my shutter finger on it. But I know a lot of photographers who are carpenters. I think it has something to do with using tools. After all, a camera is just another tool: in order to use one, you have to know how it works. Read the full article…