Today, ‘tangent handrail’ is certainly an obscure topic. Until recently, when I taught a seminar on the subject in Seattle, I didn’t think anyone would be interested. I was wrong. At that seminar, hosted by Keith Mathewson of Seattle Fine Woodworking, we had a full house of dedicated craftsmen who came together from all parts of the country for one reason only—to learn something new. Read the full article…
Ever since portable table saws first appeared on jobsites, carpenters have been throwing away the guards, and for good reason: They’re difficult to remove and re-install; after they’ve been used for a few months, you can’t see through the plastic shroud, so it’s impossible to align the blade with a measurement mark; you have to remove the guard to make narrow rips or rabbets; and carpenters have always suspected that the splitters cause more kickback than they prevent. Those are a lot of reasons to set aside a saw guard. Read the full article…
Soon after Larry Haun published his book, A Carpenter’s Life, I overheard someone complaining that the book was ‘repetitious’. They said: “Larry just keeps saying the same stuff chapter after chapter—take care of the earth, don’t be greedy, care about your neighbors. I thought the book was going to be about carpentry!” I didn’t have the courage to speak up then, but I will now, from the safety of my desk. Yes, Larry Haun’s final, and perhaps most illuminating, book is repetitious—and it should be. Read the full article…
Many of you know John Ratzenberger from his role as Cliff Clavin on the popular sitcom “Cheers”. Cliff was a postal worker who spent his free time eating peanuts and drinking beer. John, on the other hand, is an accomplished actor who spends his free time advocating on behalf of education for the construction industry. Read the full article…
Sometimes it’s the little jobs that allow us to flex our ingenuity muscle more than the big jobs. Read the full article…
I’ve heard carpenters and trim installation contractors complain that PVC trim expands and contracts too much. My comment to them is: Yes, cellular PVC trim does move, but so do all other exterior building products, and many of them just as much as, if not more than, cellular PVC.
Read the full article…
I’ve heard carpenters and trim installation contractors complain that PVC trim expands and contracts too much. My comment to them is: Yes, cellular PVC trim does move, but so do all other exterior building products, and many of them just as much as, if not more than, cellular PVC.
Read the full article…
A few months ago, I wrote a short article about a recent job I was working, and the RRP (Renovating, Repairing, Painting) rule regarding the lack of standards for HEPA vacuums. This is a follow-up to that article. Read the full article…
About two weeks before leaving for three days of Roadshows in New Jersey a while back, I got a call from a friend in North Carolina: “Hey,” he said, “I know this guy in New Jersey who turns 16-ft. columns and tall porch posts on a 19th-century lathe!” I couldn’t pass that up. Read the full article…
About a year and a half ago, my friend Gary Striegler gave me the idea of building closets with adjustable rods and shelving. At first, I was a little confused about how the rods could be adjustable, but after I read an article Gary wrote for JLC, it all started becoming clear. The shelves adjust like any cabinet with adjustable shelves, but it’s the adjustable rods that make this system really cool. Read the full article…
When I started out in the building business, interest rates were low, money was easy to borrow, and custom homes were the way to go. But six years later, in the early 1980s, that all changed. Interest rates went over 15%. No one could afford, let alone qualify, for a loan. Economics and demand dragged us into multi-family housing—we started installing finish work on apartment complexes, condominiums, and townhouses. The work was hard, the prices competitive, but the profits were good if you had your act together, if you were fast and didn’t make mistakes. Read the full article…
Recently, a builder looking for help with a few projects referred a client to me. One of the projects was a mantel with cabinets on either side. They were unsure exactly what they wanted for the mantel, but the cabinet design would be similar to the kitchen cabinets they already had in their home. Read the full article…
As carpenters, we’ve been known to invest heavily in tools that make our jobs easier and more efficient. When was the last time you saw a fellow framer or trimmer drive more than a few nails by hand? It’s likely been awhile, as most of us are using pneumatic or gas-powered nailers these days. Read the full article…
As a hardwood flooring installer, I have been using wood moisture meters professionally for over 30 years. To use these meters properly, you need to understand some fundamental properties about wood moisture content and how the various meters actually function. Read the full article…