It might not be so new anymore—it took me months to get my hands on the K5 Pocket Hole jig, but it was worth the wait. Years ago, the Kreg Tool Company changed the way we work by popularizing pocket-hole joinery. Since then, they’ve continued to improve on the original model. The new K5 Jig is extremely easy to adjust, comes with a box-full of accessories, and even though most everything is plastic and has that DIYer feel, this is a tool for professionals. Read the full article…
Years ago, in a Fine Homebuilding article, I explained how to build corbels for an Italianate mirror frame. I ran out of pages in that short article before I could discuss how to layout the pediment. I have plenty of room here, so I’ll cover that part of the story, and I’ll include all the material that we couldn’t fit into the Fine Homebuilding Master Carpenter article. Read the full article…
(Photos by Kirk Grodske)
I don’t do a lot of trim work. But when I do, it’s often stain-grade or pre-painted, and the miters have to be perfect! I mostly hang doors, so I rarely have a full-size work table set up—usually, I just have a door bench. Most of the casing I work with is small. At first, I thought it was too small to survive a Clam Clamp, but I’ve learned better (more on that later!). Read the full article…
Since I first took the pictures you saw in the first half of my article, Portable Pre-assembly Tables, I was able to figure out an even better way to pre-assemble casing, especially small casing. Now I use a Clam Clamp! Read the full article…
(Photos by Kirk Grodske)
I don’t do a lot of trim work. But when I do, it’s often stain-grade or pre-painted, and the miters have to be perfect! I mostly hang doors, so I rarely have a full-size work table set up—usually, I just have a door bench. Most of the casing I work with is small. At first, I thought it was too small to survive a Clam Clamp, but I’ve learned better (more on that later!). Read the full article…
…with One Router Sled
I live in an old stone barn that was converted to a house in the 1950s. The master bathroom needed a makeover, so I gutted it in preparation for a complete overhaul. I wanted to build a new closet and separated toilet area, both of which needed doors. I decided to build louvered doors out of Mahogany, which would normally cost approximately $600 from an online supplier. Read the full article…