Subscribe to TIC

Archive for August, 2010

Hot Topics: 41 Comments | Add a Comment

Following the Signs

by

How do you respond when your integrity and patience are challenged?

Are you far enough along in life to have figured out that the best lessons are learned when convictions and integrity are tested?

If right and wrong could just be learned in the safe environment of the classroom, it would be so much simpler. True learning, however, occurs in the real world, often from the unexpected. Things that take us by surprise force our brains to react without a formulated plan or opinion. This kind of situation tests how strong you are. Hence the need to know beforehand what your personal convictions are, so when tested, good reasoning and integrity retain the upper hand. Read the full article…

Hot Topics: 3 Comments | Add a Comment

Review: Katz Roadshow in Bellingham

by

On the only cold, rainy day of the month so far, I made the trip “across the line” to Bellingham, Washington to attend a Katz Roadshow event at a local builder supply store, Builder’s Alliance. I spent the better part of the day in an outdoor makeshift meeting room, surrounded by lifts of plywood and lumber stacked twenty feet high. It was cold, but we were covered and somewhat protected from the wind—you see, I had my Kilt on, and that meant bare legs, brrrr. Fortunately, the show more than made up for the chilly weather. Read the full article…

Feature Articles: 15 Comments | Add a Comment

Shop Kitchen

by

About twenty years ago, I got some rough cherry boards from Grandpa’s garage attic. He had cut down a cherry tree in his yard back in the 1930s, sawed it into boards, and put it up in the attic to dry. It sat in my barn for more than 10 years before I could figure out what to do with it.

A few years ago, I decided that it was time to renovate the Collins Tool Company shop kitchen—make a nice place where we could fix lunches, and also demonstrate our tools. I didn’t have enough of the cherry to build boxes, and I didn’t want to buy a bunch of expensive plywood, so I decided to use it for the kitchen project. Read the full article…

DesignING Class: 20 Comments | Add a Comment

Homemade MiterTite Joinery

by

This is a follow-up to the Curtis Mitertite article by Dave Parker, and an attempt to answer the question about the feasibility of making this joint in the field. I previously posted some comments to Dave’s article and uploaded some photos of a prototype jig that I made with the resulting joint. This is a more detailed account of what I think a setup should be, taking into account the problems encountered with the prototype, and also addressing the need for different size casings. Read the full article…